Technical Data - Cameo UVO Manual De Usuario

Pin Assignment
DMX cable with 3-pin XLR connectors:
Shield
1
3
2
DMX TERMINATORS (TERMINATING RESISTORS)
To prevent system errors, the last device in a DMX chain needs to be equipped with a terminating resistor (120 ohm, 1/4 Watt).
3-pin XLR connector with a terminating resistor: K3DMXT3
5-pin XLR connector with a terminating resistor: K3DMXT5
Pin Assignment
3-pin XLR connector:
1
3
2
DMX ADAPTER
The combination of DMX devices with 3-pin connectors and DMX devices with 5-pin connectors in a DMX chain is possible with suitable
adapters.
Pin Assignment
DMX Adapter 5-pin XLR male to 3-pin XLR female: K3DGF0020
Pins 4 and 5 are not used.
Pin Assignment
DMX Adapter 3-pin XLR male to 5-pin XLR female: K3DHM0020
Pins 4 and 5 are not used.

TECHNICAL DATA

Model name:
Product Type:
Type:
Colour spectrum LED-washer:
Number of LEDs LED-washer:
LED type LED-washer:
Colour spectrum flower-effect:
Number of LEDs flower-effect:
LED type flower effect:
Colour spectrum strobe-effect:
Number of LED stroboscope effect:
LED type stroboscope-effect:
Colour spectrum laser-effect:
Number of LEDs laser-effect:
LED type laser-effect:
Laser class laser effect:
Laser shutdown (safety function):
DMX input:
DMX output:
DMX-mode:
DMX functions:
1
3
2
CLUVO
LED / Laser-effect
5-in-1 effect spotlight
RGB + UV
9
4 W quad
RGBA
84 (24 x red, 18 x green, 18 x blue, 24x amber)
75 mW
CW
12
0.5 W
red LED (650 nm),
green LED (532 nm)
1 x red, 1 x green
red 100 mW, green 30 mW
3R
Lock switch (incl. 2 keys)
Remote connection
3-pin male XLR
3-pin female XLR
3-channel, 5-channel, 12-channel, 19-channel, 32-channel
LED-programme, laser-programme, stroboscope-programme, rotating grating disc for laser,
stroboscope, colour macro, pixel control, laser strobe, programme speed
DMX cable with 5-pin XLR connectors (pin 4 and 5 are not used):
5
4
3 3
2
1
Shield
5-pin XLR connector:
5
4
3
2
1
5
4
2
1
13