Ir Remote Control - Cameo UVO Manual De Usuario

IR REMOTE CONTROL

Aim the infrared remote control directly at the infrared sensor on the front of the spotlight The maximum
range is approximately 8 metres. In DMX and Slave modes, the remote control is deactivated.
Blackout
ON/OFF
Auto-programme
AUTO
Sound-control
MUSIC
Pause
Colour selection
Colour selection
PAR-lamp
A
Flower-programme
B
Laser-effect
C
Numeric keys
0 - 9
Sound-control
Strobe programme
-/--
The ON/OFF button is used to switch off all internal
effects (blackout), regardless of operating mode enabled
via the remote control. By pressing the ON/OFF button
again, the previously selected mode is re-activated.
Combination of all internal effects (Auto-mix). Switch to
AM01 - AM03 by pressing repeatedly.
activates the sound-control. Switch to SM01 - SM03
by pressing repeatedly (Sound-mix). Setting the micro-
phone sensitivity on the unit (MIC MIN - MAX).
Stops the effect programme ("freezes" a scene). Press
again to continue the programme.
Colour selection for the PAR-lamp. Change colours by
pressing repeatedly. Reset by pressing on one of the
programme buttons (AUTO, MUSIC, A, B, C).
Colour selection for flower-effects. Change colours by
pressing repeatedly. Reset by pressing on one of the
programme buttons (AUTO, MUSIC, A, B, C).
Activates the PAR-lamp effect programmes
(Auto-programme / sound-control). Switch to
AP01 - AP08 by pressing repeatedly (SP01 - SP06 if
sound-control is active).
Activates the flower-effect programmes (Auto-pro-
gramme / sound-control). Switch to Ab01 - Ab10 by
pressing repeatedly (Sb01 - Sb10 if sound-control is
active).
Activates the laser-effect programmes (Auto-pro-
gramme / sound-control). Switch to AL01 - AL06 by
pressing repeatedly (SL01 - SL03 if sound-control is
active).
Setting the running speed for the auto-programme. 0 =
slowest, 9 = fastest run speed.
Activates or deactivates sound-control. Setting the
microphone sensitivity on the unit (MIC MIN - MAX).
Activates the strobe-effect programmes (Auto-programme
/ sound-control). Switch to AF01 - AF08 by pressing
repeatedly (SF01 - SF08 if sound-control is active).
11