Before Using For The First Time - Siemens VS5 Serie Instrucciones De Uso

Tabla de contenido

Publicidad

en
Used vacuum cleaners
Used vacuum cleaners still contain many valuable
materials. Therefore, please take your used vacuum
cleaner to your retailer or recycling centre to be
recycled. For current disposal methods, please
enquire at your retailer or your local council.
Disposal of filters and dust bags
Filters and dust bags are made from environmentally
friendly materials.
As long as they do not contain substances that are
not permitted to be disposed of in the household
rubbish, you can dispose of them with your normal
household rubbish.
!
Please note
The mains socket must be protected by at least a 16
amp fuse.
If a fuse should blow when you switch on the
appliance, this may be because other electrical
appliances which have a high current draw are
connected to the same power circuit.
To prevent the fuse from blowing, select the lowest
power setting before switching the appliance on, and
increase the power only once it
is running.
Please fold out the picture page

Before using for the first time

Illustration 1*
Push the handle onto the flexible tube and until it
engages.
Starting up
Illustration 2
a) Lock the suction hose supports into the suction opening.
b) When removing the suction hose, press together both
latches and pull out the hose.
Illustration 3*
Connect the handle and the suction hose.
Illustration 4*
a) Connect the floor nozzle and the suction hose.
b) Insert the telescopic pipe into the supports of the floor
nozzle and secure by turning.
*Depending on version
All manuals and user guides at all-guides.com
Illustration 5*
a) Connect the suction hoses.
b) Unlock the telescopic pipe and adjust to the desired
Illustration 6*
Illustration 7
Illustration 8
Illustration 9*
a) Set the level of suction by turning the on / off button in
b) The suction performance can also be
Suction
Illustration 10
Illustration 11*
a) Combination nozzle
b) Corner nozzle
c) Upholstery nozzle
d) Mattress nozzle
e) Hard floor nozzle
f) Furniture brush
Illustration 12
length by moving the adjusting button / sliding sleeve in
the direction of the arrow.
Slide the attachment support on to the combination
nozzle and clip on to the suction / telescopic pipe
Take the mains cable by the plug and pull out the desired
length and then plug in to the mains socket.
Switch on / off the vacuum cleaner by pressing the on /
off button in the direction of the arrow.
the direction of the arrow.
turning the secondary air regulator in the direction of the
arrow.
Secondary air opening open
Secondary air opening closed
Setting the floor nozzle:
fitted carpets and carpets
smooth floors
Vacuuming with accessories
(connect to the handle or the suction hose as required)
For vacuuming in corners, joins, upholstery, curtains etc.
For vacuuming in corners and joins
For vacuuming upholstery, curtains etc.
For vacuuming mattresses, upholstery etc.
For vacuuming hard floor surfaces (tiles, parquet etc.)
To vacuum window frames, cupboards, sections etc..
When taking brief vacuuming pauses, you can use the
parking aid on the back of the appliance. Push the hook
on the floor nozzle in to the recess on the back of the
appliance.
regulated by
Suction reduced
Maximum suction
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Vs5.a.Vs5.b.Vs5.c.

Tabla de contenido