Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
• Be sure your extension cord is properly wired and in good electrical condition. Always replace a damaged
extension cord or have it repaired by a qualified person before using it.
• Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.
Recommended Minimum Wire Gauge for Extension Cords (120 Volt)
Nameplate
Extension Cord Length
Amperes
25 Feet
(At Full Load)
0–2.0
18
2.1–3.4
18
3.5–5.0
18
5.1–7.0
18
7.1–12.0
18
12.1–16.0
14
16.1–20.0
12
SPECIFIC SAFETY rULES FOr ELECTrIC METAL SHEAr
WArNING:
(GAINED FrOM rEPEATED USE) rEPLACE STrICT ADHErENCE TO PrODUCT SAFETY
rULES. If you use this tool unsafe or incorrectly, you can suffer serious personal injury!
Hold the tool by insulated gripping surfaces
•
may contact hidden wiring. Contact with a "live" wire will make exposed metal parts of the tool "live" and
shock the operator.
Wear eye and hearing protection.
•
otherwise specified, everyday glasses provide only limited impact resistance, they are not safety glasses.
use only certified safety equipment; eye protection equipment should comply with ANSI z87.1 standards.
Protective hearing equipment should comply with ANSI s3.19 standards.
Always hold the tool firmly.
•
Always keep hands out of the path of tool
•
slip could your hand to move into the tool.
Check your work area for proper clearances before cutting
•
into your workbench, the floor, etc.
Anyone using vibrating tools regularly or for an extended period should first
•
be examined by a doctor
are not being caused or worsened from use. Pregnant women or people who have impaired blood circulation
to the hand, past hand injuries, nervous system disorders, diabetes, or Raynaud's Disease should not use this
tool. If you feel any symptoms related to vibration (such as tingling, numbness, and white or blue fingers),
seek medical advice as soon as possible.
Do not use tool if switch does not turn it on or off
•
by the switch is dangerous and must be repaired.
Wear cushioned protective gloves to minimize the vibration.
•
may cause personal injury.
Use tools with the lowest vibration
•
WArNING:
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
50 Feet
75 Feet
18
18
18
16
14
12
10
DO NOT LET COMFOrT Or FAMILIArITY WITH PrODUCT
Do not leave the tool running unless hand held.
and then have regular medical check-ups to ensure medical problems
read and understand all warnings, cautions and operating
SAVE THESE INSTRUCTIONS
100 Feet
18
18
18
16
16
14
14
12
12
10
10
10
8
8
when performing an operation where the tool
Always use safety glasses with side shields. unless
. Avoid awkward hand position where a sudden
. Any tool which cannot be controlled
when there is a choice.
150 Feet
200 Feet
16
16
14
14
12
12
12
10
8
8
8
6
6
6
. This will avoid cutting
Excessive vibration
5
Publicidad
Tabla de contenido
