Installation - Ariston CARES PREMIUM EXT Instrucciones Técnicas De Instalación Y Mantenimiento

installation

GB
Positioning
The device detects the room tempera-
ture, therefore several factors should be
taken into account when choosing an in-
stallation site.
Keep it away from sources of heat (radi-
ators, sunlight, fi replaces, etc.) and from
draughts, doorways and windows which
could affect the temperature readings.
It should be installed approximately 1.50
metres above the fl oor level.
Warning
Installation should be performed by a
qualifi ed technician.
Before fi tting the appliance, make sure
the electricity supply is not connected.
Wall installation
The Sensys system interface must be
fi tted to the wall before the BUS line is
connected.
- connect the pair of wires to the con-
nector (fi g. 1);
- open up the holes required for fi xing;
- fi x the base of the device to the box on
the wall using the screws supplied in
the kit (fi g. 2);
- position the system interface on the
base, pushing it gently downwards
(fi g. 3).
86
BUS
B T
fi g. 1
fi g. 2
fi g. 3
B T
fi g. 4