Setting The Autorun Function - Sony VPL-CX3 Manual De Instrucciones

5
Click the [OK] button.
The " Delete current presentation image?" message appears.
6
Click the [OK] button.
The material selected in Step 4 is deleted from the Memory Stick.
Note
You can delete only presentation materials created by this software.
To close the Delete window
Click the [Cancel] button.

Setting the Autorun Function

If you have set Autorun for a piece of presentation material you want by using
this software, when you insert a Memory Stick into the projector's Memory
Stick slot, the slide show starts automatically. This is called the Autorun
function.
For details on the Autorun function, refer to the Operating Instructions for the
Memory Stick.
Select the presentation material for which you want to set the Autorun function as
follows:
1
Click the [Switch Main Window] button, then display the Full-Main
window.
2
Click the [Autorun] button.
The Drive window appears. Select the Memory Stick drive to which you
save presentation materials.
3
Click the [OK] button.
The Autorun window appears.
(Continued)
Using a Memory Stick File
23
GB