Specifications - Hach MET ONE 6000 Serie Manual Básico Del Usuario

Table of contents
Specifications on page 3
General information on page 4
Installation on page 8

Specifications

Specifications are subject to change without notice.
Specification Details
Dimensions (W x D x 13.56 x 8.93 x 12.06 cm (5.34 x 3.52 x 4.75 in.)
H)
Enclosure 304 stainless steel
Light source Long Life Laser
Weight 0.82 kg (1.8 lb)
Pollution degree 2
Installation category I
Protection class III
Power requirements 9-28 VDC (source: Class 2 limited energy, < 150 VA)
Power consumption Serial and pulse units: 3.3 W; Ethernet unit: 4.3 W;
(maximum) Analog: 3.5 W; 1 A maximum
Operating 5 to 40 °C (40 to 104 °F); best performance: 10 to 32 °C
temperature (50 to 90 °F)
Storage temperature -40 to 70 °C (-40 to 158 °F)
Humidity Operating and storage: 5 to 95% relative humidity, non-
condensing
Altitude 2000 m (6562 ft) maximum
All manuals and user guides at all-guides.com
Startup on page 15
Operation on page 16
Maintenance on page 23
™
diode , Class 3B laser
Specification Details
Port sizes Model 6003, 6005: barb fitting for 0.32 cm (1/8-in.) ID
inlet tubing, 0.64 cm (¼-in.) ID outlet tubing
Model 6013, 6015: barb fitting for 0.64 cm (¼-in.) ID inlet
tubing, 0.64 cm (¼-in.) ID outlet tubing
Output signal options Pulse, analog 4-20 mA, serial RS232 with Modbus RTU
or FXB communication protocol (no networking), serial
RS485 with Modbus RTU or FXB communication
protocol, Ethernet with ModbusTCP protocol
Data storage 1000 samples/records (oldest records are written over
when the buffer is full)
Sample flow rate Model 6003, 6005: 0.1 cfm (2.83 Lpm) ± 5%
Model 6013, 6015: 1.0 cfm (28.3 Lpm) ± 5%
Inlet pressure Ambient to 2.5 mm (0.1 in) Hg vacuum
Vacuum requirement ≥ 406 mm (16 in.) Hg (542 mbar) minimum vacuum
measured at each instrument with flow through all
instruments.
Range Model 6003: 0.3 μm to 10.0 μm at 0.1 cfm (2.83 L/min)
Model 6005: 0.5 μm to 10.0 μm at 0.1 cfm (2.83 L/min)
Model 6013, 6015: 0.5 μm to 10.0 μm at 1.0 cfm
(28.3 L/min)
Sensitivity Model 6003: 0.3 μm at 0.1 cfm (2.83 L/min)
Model 6005: 0.5 μm at 0.1 cfm (2.83 L/min)
Model 6013: 0.3 μm at 1.0 cfm (28.3 L/min)
Model 6015: 0.5 μm at 1.0 cfm (28.3 L/min)
Counting efficiency Model 6003: 50% (± 20%) for 0.3 μm, (100% ± 10% at
1.5 times the minimum sensitivity)
Model 6005, 6013, 6015: 50% (± 20%) for 0.5 μm, (100%
± 10% at 1.5 times the minimum sensitivity)
Coincidence loss Model 6003, 6005 (all output options): 10% at
140,000,000 particles /m
Model 6013, 6015 (all output options except for pulse):
10% at 20,000,000 particles/m
1
.
1
.
3 3
(4,000,000 particles /ft )
3 3
(566,000/ft )
English 3