Ice Maker; Night Mode - Sub-Zero Designer Serie Manual De Instrucciones

Product Operation

Ice Maker

To operate the ice maker:
1 To turn on the ice maker, touch
screen. A single highlighted cube indicates the ice
maker is turned on.
is turned on.
2 To turn off the ice maker, touch
highlighted.
After initial start-up, discard the first few batches of ice.
The ice may contain impurities from new plumbing con-
nections.
Max ice increases ice production up to 30% for a 24-hour
period. During that period, some components may run at
a higher speed resulting in a unique audible tone. This is
typical and will revert back after 24 hours or when the ice
bin is full.
Ice may fuse together if not used regularly. To avoid, dis-
card the ice and allow the ice maker to replenish.
Turn off the ice maker if the ice bin is removed for an
extended period. The unit is equipped with a 3-minute
delay after the ice bin is removed, to ensure cubes are not
ejected before the ice maker is turned off or the ice bin is
installed.
18 | Sub-Zero Customer Care 800.222.7820
on the options
indicates the max ice feature
until no cubes are

Night Mode

Night mode automatically reduces interior light brightness
when low ambient light is detected.
upper-left corner of the control panel display when night
mode is turned on.
appears when low ambient light is detected. The
interior light brightness remains reduced for three minutes,
even if the ambient light changes. Touch
brightness.
To turn night mode on or off:
Touch .
1
2 Touch .
appears in the
to increase