Cleaning And Maintenance - cecotec FORCESILENCE 9800 SKYLINE BLADELESS Manual De Instrucciones

• The timer will be cancelled if the device is turned off.
SLEEP MODE
• Press this button
• Air will be released softly.
• Press the same button to deactivate sleep mode.
TURBO MODE
• Press this button
• Press the same button to deactivate this function.
OSCILLATION FUNCTION
• Long press the touch LED display on the fan while the device is operating to activate the
oscillation function.
• Long press the same button for 1 second until the device beeps once to deactivate this
function.
• Press the oscillation button (
BATTERY REPLACEMENT (REMOTE CONTROL)
The remote control requires a CR2025 button cell.
1. Pull out the battery compartment cover.
2. Insert the battery with the "+" sign facing upward.
3. Insert the battery compartment again in its position.
Warning: If the product is not going to be used for a long time, remove the battery from inside
the product.

5. CLEANING AND MAINTENANCE

• Use a soft dampened cloth to clean the product's surface. Do not use abrasive or corrosive
products.
• Use a dry clean cloth to clean the plug regularly, this will avoid future problems.
• Do not immerse any part of the fan in water or other liquids.
( ) on the remote control to activate the sleep mode.
( ) on the remote control to activate the turbo mode.
) on the remote control to activate this function.
FORCESILENCE 9800/9900 SKYLINE BLADELESS
ENGLISH
15