Worx WG783 Manual Del Usuario página 17

Sierra de mane inalambrica
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

to SharPEN bladE iN a ViSE (See l)
1. Be sure the switch lever is released, the
blade has stopped and the safety key removed
before removing the blade.
2. Remove blade from mower. See instructions
for removing and attaching blade.
3. Secure blade L-1 in a vise L-2.
4. Wear safety glasses and be careful not to cut
yourself.
5. Carefully file the cutting edges of the blade
with a fine tooth file L-3 or sharpening stone.
6. Check balance of blade. See instructions for
blade balancing.
7. Replace blade on mower and tighten
securely. Refer to instructions below.
bladE balaNCiNG (See m)
Check balance of blade by placing center hole
in blade M-1 over a nail or screwdriver shank
M-2, clamped horizontally in a vise M-3. If
either end of the blade rotates downward, file
that end. Blade is properly balanced when
neither end drops.
bladE maiNtENaNCE (See N1, N2)
Renew your metal blade after 50 hours
mowing or 2 years, which ever is the sooner-
regardless of condition.
Follow these procedures to remove and
replace the blade. You will need garden gloves
(not provided) and a spanner wrench (not
provided) to remove the blade. Hold the blade
(15) and unscrew the blade bolt (14) counter-
clockwise using a spanner wrench, and then
remove blade.
To re-assemble, position the blade (15) with
the cutting edges towards the ground. Then
securely tighten the blade bolt (14).
STORAGE (See O)
Stop the mower and always remove the
safety key. Clean the exterior of the machine
thoroughly using a soft brush and cloth. Do
not use water, solvents or polishes. Remove
all grass and debris, especially from the
ventilation slots.
Turn the machine on its side and clean the
blade area. If grass cuttings are compacted
in the blade area, remove with a wooden or
Cordless Li-ion handy saw
All manuals and user guides at all-guides.com
plastic implement.
Store the machine in a dry place. Do not place
other objects on top of the machine.
To aid storage, release the handle cam lever,
and rotate or fold the upper handle.
17
17
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido