Garland CRUSHER 503 NRQG Manual De Instrucciones página 40

English
6. INSTRUCTIONS FOR
COMMISSIONING
6.1. UNPACKING AND BILL OF MATERIALS
This machine comes factory assembled except for the
handlebars and wheels.
Inspect the product carefully to ensure there are no
damaged items. If you find any damaged or missing
part, do not use the machine until the defect has been
repaired or you have all the parts that the machine
consists of. Using the machine with defective parts
or without all its elements can cause severe personal
injury.
6.2. MOUNTING
6.2.1. HANDLEBAR ASSEMBLY
Position the handlebar (A) matching the holes.
Insert the bolt (1) through the front hole and screw
with the nut (5).
Insert the bolt (2) through any of the rear holes, these
being the ones that regulate the working height and
screw with the other nut (5).
40/172