Introduction - Garland CRUSHER 503 NRQG Manual De Instrucciones

English
ÍNDEX

1. Introduction

2. Normative and security measures
3. Warning signs
4. Machine symbols
5. Machine description
6. Start up instructions
7. Machine usage
8. Maintenance and service
9. Troubleshooting
10. Transport
11. Storage
12. Recycling and machine disposal
13. Warranty conditions
CE Declaration of conformity
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Ref.:GDMCRUSHER503NRQGV22M0122V1
PUBLICATION DATE:
REVIEW DATE:
30
31
37
38
39
41
46
48
53
55
55
55
56
57
25/01/2022
25/01/2022
1. INTRODUCTION
Thank you for choosing this Garland machine. We are
sure that you will appreciate the quality and features
of this machine, which will make your task easier for
a long period of time. Remember that this machine
has the widest and most expert technical assistance
network to which you can go for the maintenance of
your machine, troubleshooting and purchase of spare
parts and/or accessories.
Attention! Read all safety warnings and all
instructions. Failure to observe all warnings
and instructions listed below may result in
fire and/or serious injury. Before using this machine,
carefully read the information in this manual on safe
and correct starting techniques.
Use this machine only for shredding small bushes,
brush and brush. Do not use this machine for other
purposes not intended. Using this machine for
operations other than those intended can lead to
dangerous situations.
To avoid incorrect handling of this machine, read
all the instructions in this manual before using it for
the first time. All information included in this manual
is relevant to your personal safety and that of people,
animals and things around you. If you have any
questions regarding the information included in this
manual, ask a professional or go to the point of sale
where you purchased this machine to solve it.
Save all warnings and instructions for future
reference. If you sell this machine in the future
remember to give this manual to the new owner.
The expression "Breaker in Open position" means that
the breaker is disconnected and "Breaker in Closed
position" means that the breaker is connected.
30/172