Periodic Maintenance - Garland CRUSHER 503 NRQG Manual De Instrucciones

be between the minimum and maximum marks.
- If the mark is below the minimum add a little more
oil and recheck.
- If the mark is above the maximum you will have
to remove oil from the crankcase. To do this, tilt
the machine and let out a little oil (put a container
at the end of the tube to prevent oil spilling from
the machine or onto the ground).

8.2. PERIODIC MAINTENANCE

Perform regular inspections of the machine in order to
ensure effective operation of the machine and prevent
risk of injury to machine and user. Replacement parts
should be purchased at the official service dealer.
Operation
Check that there are no loose parts
Check the status of the milling cutters
Check the engine oil level
Change the engine oil
Change the transmission oil
Clean the air filter
Check the spark plug
Check belt
The use of non-official spare parts may cause risk
of accident, injury to the user and scrapping of the
machine.
Perform maintenance frequently as indicated in the
following table:
•
•
•
•
•
47/172
•
•
•
•
English
•
•