cecotec CONGA EXCELLENCE DRY Manual De Instrucciones página 25

3. Turn on:
• Turn on the switch on the side of the product, "I" means power on, "O" means power off.
* When the product finishes cleaning, we advise not to turn off the power, keep its charging status
in order to make it work better during the next cleaning..
WARNING
The vacuum cleaner robot is equipped with an ON/OFF switch on its main body. As a safety
system, if the robot is switched OFF, all preset values will be restored. If you want the vacuum
cleaner robot to be programmed at a specific time, the switch must always be ON, otherwise,
you would need to program the cleaner again from the remote control.
4. Charge:
Put the product on the charging base, make sure the charging pole has been aligned.
* AUTO button: green/blue light flash, showing the master is being charged.
* AUTO button: green/blue light always on, charge complete. For the first time use, please conti-
nue charging the product for 12 hours.
Remote control:
1. Start cleaning:
* Before starting the auto running mode, please make sure that the green/blue light on the AUTO bu-
tton is on. The product is waking up. If the product were not turned on, please push the AUTO button
05049_Conga Excellence Dry_Manual_SA.indd 25
ENGLISH
Conga Excellence Dry 25
11/8/17 15:40