Technical Especifications; Box Content - cecotec CONGA EXCELLENCE DRY Manual De Instrucciones

ENGLISH
04 The cleaner
did not work
automati-
cally at the
appointed
time
05 The remote
control does
not work (the
control ran-
ge of remote
control is 5
meters)
6. TECHNICAL SPECIFICATIONS
Voltage: 14,4 V - 2600 mAh
Charging Base: Yes
Rated input voltage: 19 V
Rated output current: 0,6 A
Remote Control: Yes
Rated input voltage: 3
As the product needs constant improvement, we reserve the right for any change in technology
and design. We also reserve the right to interpret these data.

7. BOX CONTENT

1. Robot vacuum cleaner
2. 4 Side brushes
3. Charging base
4. Remote control
5. Adapter
6. 1 cepillo central
7. 2 Hepa filters
8. Dry tank
9. Cleaning brush
34 Conga Excellence Dry
05049_Conga Excellence Dry_Manual_SA.indd 34
The cleaner's power is off and
cannot work
The battery volume is low
The product's components are
tangled or stuck by rubbish
The battery of the remote control
is low
The cleaner's power is off or low
The infrared transmitter of the
remote control or the reception
sensor in the cleaner are dirty and
they cannot send or receive any
signal signal
There is equipment nearby which
can interfere with the signal
Turn on the product.
Please keep master charging
when it is on standby, so that
it has enough power to work
Turn off the power, clear the
dust container and the rest of
components
Replace the battery with a
new one
Make sure to turn on the
power and that the battery is
full enough
Clean the infrared transmitter
of the remote control and the
reception sensor of the clea-
ner with a clean cotton cloth
Please avoid using the remote
control around equipment
which can produce infrared
signals
11/8/17 15:40