Maintenance - cecotec CONGA EXCELLENCE DRY Manual De Instrucciones

ENGLISH
"beep", signaling that the timer has been successfully canceled.
*After changing the battery of the remote control, the current and appointed time settings need
to be programmed again.
***Floor mopping Instructions
This product also has a moping cloth. After finishing the vacuum process, the user can replace the dust
container with the water container, which works together with the moping cloth, in order to continue
moping the floor. To learn how to clean the water container, please read the section on maintenance.
• Please do not use this mop function outside the house. Before starting moping thefloor,
please roll up the edge of the carpet, in order to avoid getting the carpet dirty.
• When the cleaner is moping floor, please pay attention to the water volume. Once the water
runs out, please pour some more water into the deposit.
• Before charging, please remove the water container and the moping cloth.
1. Pouring water. Open the deposit cover and pour the water slowly into the water container.
2. Sticking the moping cloth close the deposit cover, then stick the moping cloth accordingly.
3. Installing the water container. Press the release key of the dust container on the cleaner and
take it out, then replace it with the water container.
Moping the floor. Start any cleaning mode accordingly, the product will start to pick up the
dirt and moping at the same time.

4. MAINTENANCE

* Before starting to work on the maintenance of the cleaner and its accessories, please turn off the
product and unplug the charging base.
28 Conga Excellence Dry
05049_Conga Excellence Dry_Manual_SA.indd 28 11/8/17 15:40