Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Delete all
It is possible to delete, with a single operation, all the users from
the directory; the command doesn't affect the other settings of
the system. Pressing
(if no user is stored in the directory, the system doesn't allow
you to access this menu), whilst pressing
the previous menu.
Accessing the menu "Delete all", the fi rst line of LCD shows:
- Delete all? With arrows
then press
; choosing <NO> you will return to the menu
"Delete all", choosing <YES> all the users will be erased, the
directory will be blanked and then the system returns to the
menu "Delete all". Press
Warning: this operation will erase all the users from the
directory. In case of unwanted action it is possible to recovery
erased data with the function "Recovery all" described in the
next paragraph.
Recovery all
It is possible to recovery all the users just erased from the direc-
tory; pressing
key you access the menu "Recovery all",
whilst pressing
key you will return to the previous menu.
Accessing the menu "Delete all", the fi rst line of LCD shows:
- Recovery all? With arrows
and then press
; choosing <NO> you will return to the menu
"Recovery all", choosing <YES> all the users, just erased from
the directory, will be recovered, directory will be restored and
then the system returns to the menu "Recovery all". Press
to return to the previous menu.
Warning: this function can be executed at any time, but it
is necessary to pay attention that, if some new users have been
stored, from the time the directory has been erased and when
the function "recovery all" is executed, they will not be recov-
ered.
Download
By pressing
key the fi rst line of LCD will show: "Download"
and the device is ready to receive a confi guration fi le from the
USB port. For details see paragraph "USB Connection".
Upload
By pressing
key the fi rst line of LCD will show: "Upload"
and the device is ready to send a confi guration fi le to the USB
port. For details see paragraph "USB Connection".
Format memory
By launching this function the device memory will be completely
blanked.
Warning: device memory will be completely blanked and,
after this operation, no data will be recoverable. Before launch-
ing "Format memory" evaluate carefully if really this is the action
you need.
key you access the menu "Format memory"
Pressing
whilst with
key you return to the previous menu. Accessing
the function "Format memory" the fi rst line of LCD will shows:
Format memory? With arrows
<NO> and then press
menu "Format memory", choosing <YES> a memory blanking
procedure will start, at the end the system returns to the menu
"Format memory". Press
System
In this section, system parameters can be programmed, pressing
the
key you access the parameter to be programmed, while
pressing the
key you return to the previous menu. Param-
eters that can be programmed are:
- Addresses
key you access the menu "Delete all"
you will return to
or
select <YES> or <NO> and
key to return to the previous menu.
or
select <YES> or <NO>
or
select <YES> or
; choosing <NO> you will return to the
to return to the previous menu.
- Timings
- Administrator Password
With
or
arrows you can select the parameter to be set,
while the
key backwards you to the previous menu.
Addresses
Addresses of the devices driven by the external door station,
except the addresses of the users which must be programmed
in the proper section of the menu. Pressing
menu "Programming of addresses", while pressing
return to the previous menu. Addresses to be set are:
- Door station address
- Digital exchanger address (PDX)
- Address of PB key, (PB-PB)
- Diverting door lock release
- Video OFF -1- Start
- Video OFF -1- End
- Video OFF -2- Start
- Video OFF -2- End
With
or
arrows select the requested parameter and con-
fi rm with the
key.
key will backwards you to the previous
menu.
Door station ddress
By pressing
you enter the programming of the door sta-
tion address, whilst with
menu. Entering the menu, the fi rst line of LCD shows "Enter
address", whilst at the end of the second line the currently
stored value is reported (231 from factory). With
old number, and with the keypad, enter the new one (from 231
to 240), then confi rm by pressing
previous menu.
Digital exchanger address (PDX)
By pressing
you enter the programming of the digital ex-
changer address, whilst with
menu. Entering the menu, the fi rst line of LCD shows "Enter
address", whilst at the end of the second line the currently
stored value is reported (no address from factory). With
erase the old address, if present, and, with the keypad, enter
201, if the door station has to call a main digital exchanger,
or 210, if it has to call a secondary digital exchanger, then
confi rm by pressing
, system returns to the previous menu.
Address of PB key (PB-PB)
Push-button PB (terminals PB-PB) can be used to call directly
a user of the system, instead of operate as "door lock release".
In this case it is necessary to program the address of the user
to be called. By pressing
with
key you return to the previous menu. LCD shows "En-
ter block address" and on the bottom of the second line, the
address currently stored is reported (no address from factory).
With
key erase the old address, if present, and enter the
new one, then confi rm by pressing
ter fl at address" and on the bottom of the second line, the
currently stored value is reported (no address from factory).
With
key erase the old fl at address, if present, and enter
the new one, then confi rm by pressing
the previous menu.
Attention: if button PB-PB is programmed to send a call,
it can't be used to release the door lock. Any number stored
in this parameter sets the PB-PB button to send a call,
consequently, if you wish to use PB-PB button to release
the door lock, do not program any value in it.
Address of the auxiliary relay
An actuator address (211-230) or a user address (001-200)
can be linked to the auxiliary relay. Depending on the linked
address, the auxiliary relay operates in a different ways.
- Actuator address. Storing an actuator address, that is a
block address between 00 e 99 and a device address be-
you enter the
key you return to the previous
erase the
, system returns to the
key you return to the previous
you enter the programming, whilst
, display will show "En-
, system returns to
Mi 2513
you
key
- 13 -
Publicidad
Tabla de contenido
