EAS ELECTRIC EMIH320-3F Manual De Instrucciones página 91

WARNING: Ensuring Adequate Ventilation
Make sure the induction cooker hob is well ventilated and that air
inlet and outlet are not blocked. In order to avoid accidental touch
with the overheating bottom of the hob, or getting unexpectable
electric shock during working, it is necessary to put a wooden insert,
fixed by screws, at a minimum distance of 50mm from the bottom
of the hob. Follow the requirements below.
There are ventilation holes around outside of the hob. YOU MUST
ensure these holes are not blocked by the worktop when you put
the hob into position.
• Be aware that the glue that join the plastic or wooden material
to the furniture, has to resist to temperature not below 150℃,
to avoid the unstuck of the paneling.
• The rear wall, adjacent and surrounding surfaces must
therefore be able to withstand an temperature of 90℃.
41
V.1