Connecting The Hob To The Mains Power Supply - EAS ELECTRIC EMIH320-3F Manual De Instrucciones

resistant to heat.
6. A steam cleaner is not to be used.

9.7 Connecting the hob to the mains power supply

This hob must be connected to the mains power supply only by
a suitably qualified person.
Before connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by
the hob.
2. The voltage corresponds to the value given in the rating plate
3. The power supply cable sections can withstand the load specified
on the rating plate.
To connect the hob to the mains power supply, do not use adapters,
reducers, or branching
devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be
positioned so that its
temperature will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system
is suitable without alterations.
Any alterations must only be made by a qualified electrician.
45
V.1