Finish Cooking - EAS ELECTRIC EMIH320-3F Manual De Instrucciones

If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking
zone.
The display will automatically turn off after 1 minute if no suitable
pan is placed on it.

3.3.2 Finish cooking

Touching the heating zone selection
control that you wish to switch off
Turn the cooking zone off by
scrolling down to "0" or touching "-"
and "+" control together. Make sure
the display shows "0".
Turn the whole cooktop off by
touching the ON/OFF control.
alternately with the heat setting
14
V.1