Getting started
Setting the sleep timer
The sleep timer switches off the system after
about an hour so you can fall asleep without
1
worrying about it.
•
Press SLEEP repeatedly to select an option
then press ENTER .
Choose between the following options:
• SLP ON – Switches off after about an hour
• SLP OFF – Cancels the sleep timer
After selecting SLP ON, you can press SLEEP
again to check how much time is left. Each line
indicates approximately 12 minutes
(remaining):
S L P - - - - -
Dimming the display
You can dim the display if you find it too bright.
1
Press SETUP and use
DIMMER then press ENTER .
This is shown in the front panel display.
2
Use
to select LIGHT or DARK then
press ENTER .
Note
1 The display dims when the sleep timer is set.
to choose
02
13
En