Screen Sizes And Disc Formats; Tv System Setting; Frequency Step Setting - Pioneer HTZ151DVD Manual De Instrucciones

Additional information

Screen sizes and disc formats

DVD-Video discs come in different screen
aspects, ranging from TV programs, which are
generally 4:3, to CinemaScope widescreen
1
movies , with an aspect ratio of up to about 7:3.
Televisions also come in different aspect
ratios; 'standard' 4:3 and widescreen 16:9.
Set to 4:3 (Letter Box), widescreen
discs are shown with black bars top
and bottom.
Set to 4:3 (Pan&Scan), widescreen
discs are shown with the left and right
sides cropped. Although the picture
looks larger, you don't actually see
the whole picture.

TV system setting

The default setting of this system is AUTO, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to AUTO. If you find picture distortion with
some discs, set the TV system to match your
country or region's system. However, this may
restrict the kinds of disc you can watch. See
the table for the kinds of discs compatible with
each setting (AUTO, PAL and NTSC).
1 Switch the unit into standby, then press
SETUP .
2 Use to choose TV SYS then press
ENTER .
The TV system changes as follows:
Note
1 Many widescreen discs override the system's settings so that the disc is shown in letterbox format regardless of the setting.
2 • Using the 16:9 (Wide) setting with a standard 4:3 TV, or one of the 4:3 settings with a widescreen TV, will result in distortion.
• When you watch discs recorded in 4:3 format, you can use the TV controls to select how the picture is presented. Your TV
may offer various zoom and stretch options; see the instructions that came with your TV for details.
• Some movie aspect ratios are wider than 16:9, so even with a widescreen TV, these discs will still play in a 'letterbox' style.
3 Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch
vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without col-
or. If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV has
a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at
the top and bottom of the screen.
4 You have to switch the player into standby (press
• AUTO
• NTSC
• PAL
The system automatically switches on and
you'll see the new TV system setting in the
display after seeing WELCOME.
2
Media Type
DVD/Super VCD/
Video CD/DivX
Video
CD/MP3/WMA/
MPEG-4 AAC/
JPEG/no disc

Frequency step setting

If you find that you can't tune into stations
successfully, the frequency step may not be
suitable for your country/region.
1 Switch the unit into standby, then press
SETUP .
2 Use
press ENTER .
3 Use
press ENTER .
3
STANDBY/ON) before each change.
NTSC
PAL
AUTO
4
Player setting
Format NTSC PAL
NTSC NTSC PAL
PAL
NTSC PAL
—
NTSC PAL
to choose AM 9K/10K then
to select AM 9K or AM 10K then
09
AUTO
NTSC
PAL
NTSC or
PAL
35
En