Balluff BTL7-A Serie Manual De Instrucciones página 53

BTL7-A/C/E/G _ _ _ -M _ _ _ _ -A(8)-SA211/SA311-S32/S115/S135/KA_ _/FA_ _
Magnetostrictive Linear Position Sensor – Rod Style
10
Resetting all values (reset)
NOTICE
Interference in function
Resetting the values while the system is running may
result in malfunctions.
► Stop the system before performing the reset.
The reset function can be used to restore all the settings to
the factory settings. For a reset the magnet may also be
located outside the measuring range.
1. Activate buttons
► Hold down any button for at least 3 s.
► Release buttons.
Œ
► Within 1 s hold down
and
for at least 3 s.
⇒ Output indicates error value.
⇒ Buttons are activated.
If an error or an interruption occurs while
activating the buttons, allow a wait time of 12 s
before retrying.
2. Reset
Œ ‚
► Hold down
and for at least 6 s.
⇒ Output indicates null value.
⇒ All values are reset.
► Release buttons.
⇒ Current position value is displayed.
⇒ Buttons are locked.
www.balluff.com
> 3 s
< 1 s
‚
simultaneously
> 3 s
> 6 s
LED legend: LED not on
LED green
LED display Displayed values (example)
LED1 LED2 At 0 to 10 V
1 2
1 2
10.50 V
1 2
LED flashing green
LED 1 and LED 2 flashing green-red
simultaneously
At 4 to 20 mA
5.39 V 10.80 mA
5.39 V 10.80 mA
3.60 mA
0.00 V 4.00 mA
8.43 V 15.67 mA
english 21