Balluff BTL7-A Serie Manual De Instrucciones página 60

BTL7-A/C/E/G _ _ _ -M _ _ _ _ -A(8)-SA211/SA311-S32/S115/S135/KA_ _/FA_ _
Magnetostrictive Linear Position Sensor – Rod Style
13
Type code
Interface:
A = Analog interface, voltage output 0...10 V
G = Analog interface, voltage output –10...+10 V
C = Analog interface, current output 0...20 mA
E = Analog interface, current output 4...20 mA
Supply voltage:
1 = 20...28 V DC
5 = 10...30 V DC
Output gradient:
00 = Rising (e.g. C_00 = 0...20 mA); only with BTL7-C/E
10 = Rising + falling (e.g. A_10 = 10...0 V and 0...10 V) only with BTL7-A/G
70 = Falling (e.g. C_70 = 20... 0 mA); only with BTL7-C/E
Nominal length (4-digit):
M0500 = Metric specification in mm, nominal length 500 mm
(M0025...M1016: A8)
(M0025...M7620: A)
Rod version, fastening:
A = Metric mounting thread M18x1.5, rod diameter 10.2 mm
A8 = Metric mounting thread M18x1.5, rod diameter 8 mm
Special version:
SA211 = Zero point deviation: 50.8 mm, burn-in test
SA311 = Zero point deviation: 50.8 mm
Electrical connection:
S32 = 8-pin, M16 plug per IEC 130-9
S115 = 8-pin, M12 plug
S135 = 6-pin, M16 plug per IEC 130-9
KA05 = Cable, 5 m (PUR)
FA05 = Cable, 5 m (PTFE)
28 english
BTL7 - A110 - M0500 - A - SA211 - S32