Mounting the in-
1
verter on floor
racks
34
The floor racks can be ordered as an
optional accessory.
Mounting the inverter on a horizontal
mounting surface is not mandatory,
but recommended.
Depending on the surface, different
wall plugs and screws are required for
floor mounting the floor racks. Wall
plugs and screws are therefore not in-
cluded in the scope of supply of the in-
verter. The installer is responsible for
selecting the correct wall plugs and
screws.
Mount the inverter and floor racks
2
securely to a suitable surface using
the appropriate installation mate-
rials
Do not climb onto the device!