Switching The Key Lock On And Off; General; Switching The Key Lock On And Off - Fronius Primo 3.8-1 208-240 Manual De Instrucciones

Switching the key lock on and off

General

The inverter comes equipped with a 'Key lock' function.
When the 'Keylock' function is active, the Setup menu cannot be accessed, e.g., to protect
against setup data being changed by accident.
You must enter code 12321 to activate / deactivate the 'Key lock' function.
Switching the Key
Lock On and Off
Press the "Menu" key.
1
The menu level is displayed.
Press the unassigned "Menu / Esc"
2
key
5 x.
In the "CODE" menu, the "Access Code"
is displayed; the first digit flashes.
Enter code 12321: Use the "Up" and
3
"Down" keys to select a value for the
first digit of the code.
Press the "Enter" key.
4
The second digit flashes.
Repeat steps 3 and 4 for the second,
5
third, fourth and fifth digit in the code
until...
...the set code flashes.
Press the "Enter" key.
6
In the "LOCK" menu, the "Key lock" func-
tion is displayed.
Use the "Up" and "Down" keys to
7
switch the key lock on or off:
ON = the key lock function is activat-
ed (the SETUP menu item cannot be
accessed)
OFF = the key lock function is deac-
tivated (the SETUP menu item can be
accessed).
Press the "Enter" key.
8
37