Built-In Effects Operation Section - Tascam 16 Manual Del Usuario

Ocultar thumbs Ver también para 16:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2 - Names and Functions of Parts
MULTI JOG dial
@
This dial functions as a dial when turned and as a button
when pressed.
Dial functions
i Turn when the Home Screen is open to move the file
playback position. (See "Locate function" on page 40)
i When a MENU Screen is open, turn to select items and
change setting values. (See "Basic MENU screen operations"
on page 28)
Button function
i Press when the Home Screen is open to designate a locate
point. (See "Locate function" on page 40)
i When a Menu Screen is open, press to confirm selections
and settings (ENTER button function).
Output level indicators
#
These show the output levels of the MAIN OUTPUT jacks.
When the PFL/AFL indicator is lit, these show the output
levels from the PFL/AFL L/R bus.
m/, buttons
$
i When stopped and during playback, press and hold these
buttons to search backward/forward.
i When the Home Screen is open, press the m button to
locate to the beginning of the current song (00:00:00,
which is the zero point).
i When the Home Screen is open, press the , button to
locate to the end of the current song.
i If the current song has auto punch in or out points set, you
can also locate to those points.
i If the current song has marks set, these can also be used to
locate to them.
i While pressing the 8 button, press the m button to
locate to the point where recording last started.
i While pressing the 8 button, press the , button to
locate to the point where recording last stopped.
i When the SD PLAY Screen is in playback state, press to skip
a file. (See "Playing WAV files on SD cards (SD PLAY mode)"
on page 48)

Built-in effects operation section

MUTE switch/indicator
(
When MUTE switches are on (MUTE indicators lit), signals to
the AUX OUTPUT MON 1/2 jacks are muted.
AFL switches (MON 1/MON 2)
)
When these switches are on (pushed in), the AUX OUTPUT
MON 1/2 jack output signals are sent to the PFL/AFL L/R bus.
MON 1/MON 2
knobs
Q
Use to adjust the output levels of the AUX OUTPUT MON 1/2
jacks.
SD MAIN MIX RETURN switch
W
When this switch is on (pushed in), playback of stereo master
files recorded on the SD card is output from
OUTPUT jacks.
24
TASCAM
Model 16
(MON 1, MON 2)
the MAIN
MENU button
%
i When the Meter Screen is open, press to open the Home
Screen.
i When the MENU Screen or a menu item settings screen is
open, press to return to the Home Screen.
i When the Home Screen is open, press to open the MENU
Screen. (See "Menu structure" on page 28)and (See "Basic
MENU screen operations" on page 28)
8 button/indicator
^
Press to stop playback or recording.
This button lights when stopped.
Press this button when paused to return to the beginning of
the song or file.
7/9 button/indicator
&
Press this button to start playback.
This button lights during playback and recording.
This button blinks when paused.
0 button/indicator
*
Press this button to start recording.
This button lights during recording.
Press this button during playback to start recording (Manual
punch in).
ATTENTION
Be aware that when this switch is on (pushed in), the sound
of the MAIN MIX L/R bus is not output.
PFL/AFL MASTER knob
E
Use this to adjust the send level from the PFL/AFL L/R bus.
R PHONES knob
Use this to adjust the headphone output level.
V CAUTION
Before connecting headphones, minimize the volume with
the PHONES knob. Failure to do so could result in a sudden
loud noise that could harm hearing, for example.
SELECT button
T
Open the EFFECT Screen and make built-in effect settings.
(See "Using the built-in effects" on page 38)
The built-in effect return signal is return to the MAIN MIX L/R
bus and MONITOR OUT 1/2 buses.
TO MON 1/TO MON 2 knobs
Y
Use these to adjust the levels of signals sent from the built-in
effects to the MONITOR OUT 1/2 buses.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

24Model 16

Tabla de contenido