Input Channel Mixing Section - Tascam 16 Manual Del Usuario

Ocultar thumbs Ver también para 16:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2 - Names and Functions of Parts

Input channel mixing section

q MODE switches (1-8, 9/10-11/12, 13/14)
Use these to select the input source for each channel. (See
"Setting the MODE switch" on page 36)
w COMP knobs and indicators (1-8)
Use these knobs to adjust the compression thresholds for the
signals input to each channel.
When compression is activated, the COMP indicators light.
e EQ knobs (1-8, 9/10-11/12)
i Use these to boost and attenuate the HIGH, MID and LOW
bands of each channel.
Setting range: ±15 dB
i The central frequencies of the MID bands can be set for
channels 1-8.
Setting range: 100 Hz - 8 kHz (default: 600Hz)
i Channels
9/10-11/12
are fixed at 2.5 kHz.
r MON 1/MON 2 knobs (1-8, 9/10-11/12, 13/14)
Use these to adjust the levels of signals sent to the MONITOR
OUT 1/2 buses.
POST switches (1-8, 9/10-11/12, 13/14)
t
Turn these switches on to send signals to the MONITOR OUT
2 bus after the channel faders.
FX knobs (1-8, 9/10-11/12)
y
Use to adjust the levels of the signals sent to the FX bus.
PAN knobs (1-8, 9/10-11/12, 13/14)
u
Use to adjust the stereo positions of the signals input to each
channel.
NOTE
i When PAN knobs are centered (C), signals are reduced by 3
dB and sent to both left and right MAIN MIX L/R buses.
i When a PAN knob is turned all the way to the left (L), that
channel signal is sent only to the left MAIN MIX L/R bus. It is
not sent to the right bus.
i When a PAN knob is turned all the way to the right (R), that
channel signal is sent only to the right MAIN MIX L/R bus. It is
not sent to the left bus.
22
TASCAM
Model 16
REC buttons and indicators (1-8, 9/10-11/12, 13/14)
i
Use these to select the channels to record to the SD card.
MUTE switches and indicators (1-8, 9/10-11/12,
o
13/14)
When these switches are on (pushed in, MUTE indicator lit),
those channels are muted.
Channel faders (1-8, 9/10-11/12, 13/14)
p
Use these to adjust the send levels of channel signals.
MAIN switches (1-8, 9/10-11/12, 13/14)
a
Turn these switches on (pushed in) to send channel signals to
the MAIN MIX L/R bus.
SUB switches (1-8, 9/10-11/12, 13/14)
s
Turn these switches on (pushed in) to send channel signals to
the SUB L/R bus.
PFL switches (1-8, 9/10-11/12, 13/14)
d
Turn these switches on (pushed in) to send channel signals to
the PFL/AFL L/R bus.
ON/MUTE switch
f
Set this switch to ON to input audio from a paired Bluetooth
device.
PAIRING button and indicator
g
Press and hold this button to activate Bluetooth pairing
mode.
Press when pairing to end pairing mode. (See "Connecting
with Bluetooth devices" on page 30)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

24Model 16

Tabla de contenido