Home Screen - Tascam 16 Manual Del Usuario

Ocultar thumbs Ver también para 16:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2 - Names and Functions of Parts

Home Screen

When the Meter Screen is open, press the MENU button to open
the Home Screen.
1 Repeat playback status
An icon appears when the repeat playback function is on.
(See "Repeat playback function" on page 40)
2 Song format
This shows the current song file format.
44.1kHz, 16bit
44.1kHz, 24bit
48kHz, 16bit
48kHz, 24bit
NOTE
If no song is loaded, the operation format of the unit will be
shown like
or
.
3 Automatic punch in/out function on/off status
The
icon appears when the automatic punch in/out
function is on. (See "Automatic punch in/out function" on
page 41)
4 SD card present status
When an SD card is loaded, the
When an SD card is protected, the
Since system files cannot be updated when the
appears, automatic punch in/out settings will not be retained
and previously loaded songs will not be loaded when the
unit is turned on again.
5 USB connection status
During USB connection, the
6 Song name
This shows the name of the current song.
If a song is protected, an
(See "Protecting/unprotecting songs" on page 35)
If a song has unsaved marks, an
file name.
(See "Adding marks" on page 45)
7 Transport status
This icon shows the recorder operation status.
Indicator
Meaning
Stopped at the beginning of the file
8
Paused
9
Recording
0
Playback
7
8 Playback position
The current playback position is shown by a bar.
9 Automatic punch in/out point setting status
When the automatic punch in/out function is on, these show
the status of automatic punch in/out point setting.
Punch in point
Punch out point
26
TASCAM
Model 16
icon appears.
icon appears.
icon
icon appears.
icon appears before the file name.
icon appears before the
0 Remaining time
The remaining time available for recording on the SD card is
shown (in hours: minutes: seconds).
NOTE
The remaining recordable time on an SD card depends on
the number of recording channels and SD card capacity.
q Built-in effect status
When a built-in effect is on, the number of the effect in use is
shown.
When the built-in effect is off, the
"Using the built-in effects" on page 38)
w Recorder time counter
This shows the elapsed time from the beginning of the song.
e Mark indicators
An icon is shown at each mark.
Song length
r
This shows the length of the current song (in hours: minutes:
seconds).
Function button functions
t
This shows the functions assigned to the function button on
the Home Screen.
i F1
button: This opens the Meter Screen.
i F2
button: This turns the repeat playback function
on/off.
i F3
button: This returns to the state before the
previous operation.
i F3
button: This restores the state after the previous
operation.
i F4
button: This turns the built-in effect on/off.
i F4
button:
This adds/deletes marks.
NOTE
i The
F3 button
and
those operations are possible.
i Set the F4 button function on the KEY FUNCTION screen.
"Using mark functions" on page 45)
icon appears. (See
indicators appear when
(See

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

24Model 16

Tabla de contenido