Dreame DreamBot W10 Manual página 12

Routine Maintenance
EN
Washboard
* Clean once every 2 weeks
1. Press the clips on both sides of the bottom of the base to remove the
washboard.
Click
2. Use the provided cleaning tool to clean the washboard completely.
18
3. Wipe the bottom of the base with a dry cloth.
Click
4. Insert the washboard into the base as shown in the diagram, making sure
that both clips are in place.
Click
Note: Make sure that the washboard brackets are in place.
Routine Maintenance
Cleaning the Main Brush
Press the brush guard clips inwards to remove the brush guard and lift the
brush out of the robot.
Pull out the brush covers as shown in the diagram. Use the provided cleaning
tool to remove the hair tangled in the brush.
Click
Note: Do not pull out the hair tangled in the brush excessively. Otherwise, the main
brush may be damaged.
Cleaning the Side Brush
Remove and clean the side brush.
Cleaning the Universal Wheel/Auxiliary Wheel
Note:
· Use a tool such as a small screwdriver to separate the axle and tire of the
universal wheel. Do not use excessive force.
· Rinse the universal wheel under the running water and put it back after drying it
completely.
EN
19