Storing The Machine; Engine Management - Stihl SR 430 Manual De Instrucciones

N
Dispose of any residual rinsing
solution in accordance with
environmental requirements –
follow instructions of the chemical
manufacturer.
N Allow the machine to dry with the
cap removed.
SR 430, SR 450

Storing the Machine

N
Store the machine in a dry, high or
locked location sheltered from frost
– out of the reach of children and
other unauthorized persons.
For periods of 3 months or longer
N Drain and clean the fuel tank in a
well ventilated area.
N
Dispose of fuel properly in
accordance with local
environmental requirements.
N Run the engine until the carburetor
is dry – this helps prevent the
carburetor diaphragms sticking
together.
N Thoroughly clean the machine –
pay special attention to the cylinder
fins and air filter.
N Do not expose the container to
direct sunlight for unnecessarily
long periods. UV rays can make the
container material brittle, which
could result in leaks or breakage.

Engine Management

Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
English
29