Stihl SR 430 Manual De Instrucciones página 15

1
4
5
N Slide the wide hose clamp (1) onto
the pleated hose (4).
N Secure the wide hose clamp (1) with
the screw (5) – the blower tube (2)
must still rotate.
Fitting the pleated hose on the elbow
– SR 430 only
6
7
N Slide the narrow hose clamp (6)
(bezel facing left) onto the elbow
and line it up.
N Push the pleated hose (4) over the
elbow (7).
SR 430, SR 450
2
8
N Slide the narrow hose clamp (6)
onto the pleated hose (4).
4
N Secure the hose clamp (6) with the
screw (8) from the side facing the
operator.
Fitting the antistatic system – SR 450
only
N Attach the antistatic wire (1) and
chain (2) to the blower housing with
screw (3).
6
4
8
6
3
1
2
Fitting the pleated hose on the elbow
– SR 450 only
9
4
N Push the antistatic wire (9) into the
pleated hose (4).
6
7
9
N Slide the narrow hose clamp (6)
(bezel facing left) onto the elbow
and line it up.
N Push the antistatic wire (9) between
the ends of the narrow hose
clamp (6).
N Push the pleated hose (4) over the
elbow (7).
English
4
13