Stihl SR 430 Manual De Instrucciones página 26

English
2 2
N Squeeze the tabs (2) together and
pull the lever (3) outwards.
4
N Remove the solution container from
the metering unit's housing (4) and
turn it to position B (dusting and
spreading mode).
24
4
N Thoroughly clean the plastic pins
and the sealing face on the solution
container – check that there is no
residue.
N Thoroughly clean the holes and
sealing face on the metering unit (4)
– check that there is no residue.
N Fit the solution tank on the metering
unit's housing (4).
5
N Hook the lever (3) over the bar (5)
on the solution container.
3
6
6
2 2
N Press the levers (3) down until the
tabs (2) snap into their seats (6) on
the housing with a loud click.
N Check that the container is firmly
seated.
Blower tube
1
N
Insert a screwdriver into the tab (1)
of the hose clamp (2) on the control
handle.
N Turn the screwdriver clockwise to
loosen the hose clamp (2).
N Pull the hose (3) off the stub.
SR 430, SR 450
3
6
2
3