Installing The Tow Bar; Removing The Tow Bar - Burley TAIL WAGON Manual De Instrucciones Y De Seguridad

Installing the Tow Bar

1. Depress detent and slide the tow bar into the tow bar receiver
until hole A is aligned with hole B (Figure 6).
2. Insert the retaining pin from the top through the aligned holes
(Figure 7).
3. Make sure the retaining pin has locked properly as shown
(Figure 8).

Removing the Tow Bar

1. Remove the retaining pin.
2. Depress the detent, and remove the tow bar.
ENG
6 ®
B
A
Figure 6
Figure 7
PET TRAILER
Figure 8