Maintenance Instructions; Repair Service; Disposal And Recycling - stayer LU 260 CE Manual De Instrucciones

Changing accessories
Always make sure the tool is turned off and unplugged
before installing the abrasive wheel.
On the LU 260 CE model, press the axis lock button 6 and
screw in the desired accessory while the axis is locked.
On the PL 2500 E model, you must use the included
wrench to hold the tool shaft while screwing in the desired
accessory.

Maintenance instructions

Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.

Repair service

Our after-sales service responds to your questions
concerning maintenance and repair of your product as
well as spare parts. Exploded views and information on
spare parts can also be found under:
info@grupostayer.com
Our customer consultants answer your questions
concerning best buy, application and adjustment of
products and accessories.

Disposal and recycling

The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into household
waste!
According the European Guideline 2012/19/UE
for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected separately
and disposed of in an environmentally correct manner.
Subject to change without notice.
Regulations
= Power input
= No load speed
= Plate dimension
E = Bladeshaft
= Weigth
= Sound pressure level
= Sound power level
= Vibration
ENGLISH
10
The values given are valid for nominal voltages [U]
230/240 V ~ 50/60 Hz - 110/120 V ~ 60Hz. For lower
voltage and models for specific countries, these values
can vary. Please observe the article number on the type
plate of your machine. The trade names of the individual
machines may vary.
10