Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
IR REMOTE CONTROL
12
Aim the infrared remote control directly at the infrared sensor on the front of the lamp. The maximum
range is approximately 8 metres. In DMX and Slave modes, the remote control is deactivated. Battery
for IR remote control = CR2025.
Blackout
Auto programme
Colour macro
Strobe
Speed
Individual colour macros
Brightness
Manual colour mix
Fade programmes
-
Colour preset
The blackout button is used to switch off all LEDs, regard-
less of operating mode enabled via the remote control.
Press the blackout button again to reactivate the previously
selected mode.
Auto-Programmes 1 - 6. Programme selection with
and
. Programme run speed with
and
. Brightness setting with
Colour Macros 1-15. Selection with
Strobe light for AUTO, FADE and MANUAL operating modes.
Press
to activate. Strobe speed with
Press
to deactivate strobe.
Setting the running speed for Auto and Fade programmes.
Individual colour macros 1-5. Selection with
.
Press
and
and
to adjust brightness.
Press
and
,
,
colours. Adjust intensity with
Fade programmes Auto 1 - Auto 5. Programme selection
with
and
. Programme run speed with
and
. Brightness setting with
and
.
Direct selection of colour presets 0 to 9.
and
and
and
.
and
.
and
.
and
or
to manually mix
and
.
and
and
Publicidad
Tabla de contenido
