Bushnell PRIME L20 TRAIL CAMERA Manual De Instrucciones página 11

Setting Capture Mode (1 photo, 3 photos, or video)
Use UP/DOWN to select your preferred image capture mode: Single
Photo per trigger (display shows 1 + a still camera icon), Rapid
Sequence of 3 Photos per trigger (display shows a still camera icon +
3) or Video Clips that are 10 seconds long at 720p resolution (display
shows a movie camera icon). Press OK after setting.
Setting Camera ID# (if using multiple cameras)
Use UP/DOWN to select a reference ID# (from "01" to "99") for this
camera, which will be imprinted on all photos/videos along with the
time & date. If you are only using a single camera to monitor an area,
simply leave it set to the default "Id : 01". Set a second camera that
will be used in a group of multiple cameras to "02", etc. Press OK after
setting.
SD Card Format (delete all files)
The display will show "FOrN". CAUTION: be sure to backup and save
any/all files you want to keep first, as formatting will clear the card
completely of all files-they will then be difficult or impossible to recover
from the card.
If you are sure you want to format a previously used card, use UP/
DOWN to change the "N" after "FOr_" to "Y" (Yes), then press OK to
confirm and delete all files from the card.
11