Canceling Queues; Direct Call; Making Direct Call; Call All Available - Motorola DTR720 Manual De Instrucciones

English
3.8

Canceling Queues

To exit queue mode, long press the Programmable
button.
A tone sounds. Your radio exits queue mode and
returns to the home screen.
3.9

Direct Call

You can call a pre-programmed user privately. The
Direct Call feature is configurable using the Customer
Programming Software (CPS).
You have the option to program the Direct Call feature into
the Programmable button, or assign to any radio channel.
NOTE:
To configure Direct Call feature for the first time in
your radio, download the Customer Programming
Software (CPS). Read and upload the radio IDs
(identified as "privates" in CPS) in CPS. For
more information, refer to
Software Basic Menu Instructions on page 59
32
Customer Programming
3.9.1

Making Direct Call

1 Press the Programmable button.
The display shows Direct Call Queue message
and that you are in queue.
2 To call, press the PTT button.
The distinctive Private Talk Permit Tone (TPT) is
heard.
3 Wait for the Talk Permit Tone to end and speak.
3.10

Call All Available

You can perform group call to all users available on
different channels, and users who are not in an on-going
radio conversation. The Call All Available feature does not
interrupt ongoing communications.
You have the option to program the Call All Available
feature into Programmable button, or assign to a channel
using the Customer Programming Software (CPS).