ProMed 3020 Manual De Instrucciones página 28

i
nforMation on tHe unit
• Grinding head bits are available at your local specialist
retailer or Promed. (www.promed.de).
• To ensure hygienic operation, the grinding heads must be
disinfected after use.
• The handpiece may only be disinfected using disinfectant
wipes.
Information about suitable disinfectants and products can be
obtained from Promed.
All manuals and user guides at all-guides.com
/ o
accessories
A. Before you start using the device, check if the voltage indicated
on the device corresponds to the local mains voltage. Then insert
the power plug into the power outlet and the other end of the
power cable into the matching socket (A) on the left side of the
device.
B. Insert the plug of the handpiece into the socket (B) on the right
side of the device. The socket (H) next to it is intended for the
connection of the optional foot pedal.
C. Select a suitable grinding head. Open the quick lock (C) by
turning it counter-clockwise. Insert the grinding head on the front
of the handpiece into the holder for the grinding head. Lock and
PeratinG tHe unit
Before you switch the unit on, you must set the rotating
speed (rotary knob (E)) to zero.
The power plug is intended as a separator. Make sure
that the power plug is plugged into an easily reachable
wall socket.
DE
US
FR
IT
ES
NL
RU
PL
SE
FI