Storage; Troubleshooting; Technical Data - Silk’n FRESHPEDI FTC03 Manual Del Usuario

You may turn on the product for a few seconds for more
EN
efficient cleaning.
4. Wipe dry all parts of the product after cleaning.
5. Replace the dust chamber cover before using the product
again.

8 Storage

All parts must be completely dry before being stored.
• Store all parts in a clean and dry place, avoiding heat and direct
sunlight.
• Attach the cover
for storage.

9 Troubleshooting

Some problems may be caused by minor faults that you can fix
yourself. To do so, follow the instructions in the following table.
If it is still not possible to resolve the problem, contact customer
service. Do not repair the product yourself.
Fault
The product
does not start.
Charging does
not start.

10 Technical data

Model:
Voltage:
Power:
Battery capacity:
Speed settings:
Rotation speed:
Charging time:
13
to protect the grinding disc
9
Possible cause and solution
Make sure the product is properly charged (see
chapter "Charging").
Make sure the USB cable
to the product and the USB port of a compatible
USB power source.
FTC03
DC 3.7 V
6 W
1,500 mAh (lithium)
2 (low / high)
1,900 rpm (low speed)
2,200 rpm (high speed)
2–2.5 hours
/
1 7
is securely connected
11
/
8