Special Accessories - Kärcher SV 1902 Manual De Instrucciones

Steam suction - detail nozzle (E)
We recommend the use of detail nozzle to
access difficult-to-reach areas.
The detail nozzle can be used for the follow-
ing:
! Treating stains on carpeted floors or car-
pets before using the brush.
! Cleaning steel surfaces, window panes,
mirrors and enamelled surfaces.
! Cleaning corners on staircases, win-
dow-frames, doorposts and aluminium
profiles.
! Cleaning fixtures.
! Cleaning window shutters, room heat-
ers, interiors of vehicles.
! Sprinkling indoor plants from a distance.
The detail nozzle can be combined with the
following accessories:
! Round brush (E2) suitable for hardened
dirt on very small surfaces such as cook-
ing ranges, rolling shutter, tile joints, san-
itary units, etc..
! Extension (E1): This is an accessory that
can be used for optimal cleaning of areas
that are very difficult to access. Ideal for
cleaning room heaters, doorposts, win-
dows, rolling shutter, sanitary units.
Steam suction - hand nozzle (F)
The use of hand-suction nozzle is used for
glass and mirror surfaces, smooth surfaces
in general or for cleaning fabric areas such
as sofas, mattresses, etc.
The hand nozzle can be combined with the
following accessories. As shown in Figure
D, the accessories are attached to the hand
nozzle. The upper sides of the detachable
lips are marked as "Upper Part".
! Small detachable lip (F1): For smaller
surfaces such as muntin windows and
mirrors.
! Large detachable lip (F2): For window
panes and larger surfaces such as wall
tiles.
! Crown brush (F3): For carpets, staircas-
es, car interiors, fabric surfaces in gener-
All manuals and user guides at all-guides.com
Cleaning windows
Use the following procedure to use the ma-
chine properly for cleaning windows:
! To loosen the dirt, apply steam uniformly
! Press the detachable lip against the sur-
In seasons when the temperatures are par-
ticularly low, pre-heat the window panes by
letting out steam from a distance of approx.
50 cm from the surface to be cleaned.
Round brush kit (order No. 2.860-231) 4
round brushes for the detail nozzle.
HEPA Filter (Order No.. 2.860-229)
al (after carrying out a test at a hidden
area).
A terry towel cover (F4) can also be put
on the brush.
on the surface to be treated.
face to be cleaned and move it from the
top to the bottom and keep the vacuum
cleaning function on.
Caution!

Special accessories

21
English