Skil 4680 Instrucciones De Funcionamiento Y Seguridad página 13

SM 2610916643 2-04 2/24/04 1:50 PM Page 13
FIG. 18
BLADE MUST BE IN
ALIGNMENT WITH NAIL
5. Insert plug into power source, hold the saw
firmly, squeeze trigger and slowly push the
saw forward. To make a hole, cut from inside
the circle; To make wheels or discs, cut from
the outside.
Cutting Tip: Cut slowly so the blade will stay
straight in the cut. Place small wedges in the
cut as shown in Fig. 17, to keep the inner
NAIL
circle from spreading when near the end of
the cut.
-13-