Irritrol LIFE Plus Controller 4 Manual Del Usuario página 20

LIFE Plus Controller 4-8-12-16
Note: It is possible to select only 1 single Program, A, B C or D, or ALL Programs.
Note: water flow is not tested for Overflow, Underflow and Loss when:
• 24Vac is missing
• Control Panel is removed from its Back Module
• A Valve is activated Manually
• An Hydraulic Test is running
• Life Plus is in Pause/Rain
• The condition for testing Overflow, Underflow and Loss ends before the period
needed for calculating Overflow, Underflow and Loss.
20
Local Action on Sensor
or a Meter Function ACTIVE
NONE ➞ No action
START ➞ Start the Program(s) selected in settings
STOP ➞ Stop the Program(s) selected in settings
SKIP ➞ Skip to the next programmed station for the Program(s)
selected in settings
HOLD ➞ Put on HOLD the Program(s) selected in settings
If enabled, MV remains open
RAIN ➞ Put on RAIN the Program(s) selected in settings.
Available Local Actions for each function:
Local Actions
When Sensor When Meter
becomes active Overlfow is Active
NONE Yes
START Yes
STOP Yes
SKIP Yes
HOLD Yes
RAIN Yes
REMOVE Automatic when Sensor
HOLD becomes normal again
REMOVE Automatic when Sensor
RAIN becomes normal again
When Meter When Meter
Underflow is Active Loss is Active
Yes Yes Yes
Yes Yes Yes
Yes Yes No
Yes Yes No
No No No
No No No
No No No
No No No