Playback; Adjusting Pictures - Sony SVT-LC300 Manual De Instrucciones

Playback

1 2 3
1
Turn on the power of the equipment to be used.
2
Insert the cassette.
3
Select the playback speed by pressing TAPE
SPEED.
The selected playback speed is displayed in the
display window.
4
Press PLAY z.
Playback starts.
To stop playback
Press STOP p.
To rewind the tape
Press STOP p and then REW 0.
To fast-forward the tape
Press STOP p and then FF ).
Notes
• You may not play back the tapes recorded on other
time-lapse VCR on this VCR and vice versa.
• You can play back the sound in 6-, 18- or 30-hour
mode using a T-120 tape and in 8-, 24- or 40-hour
mode using a T-160 tape. Play back the tape at the
same speed at which it was recorded so that you can
monitor the sound normally.
4
REW STOP p
FF
0 )
Playback speed
You can view the playback picture at one of the
following speeds.
Playback speed (Hour)
Recording
speed
6 (8) 18 (24) 30 (40)
6 (8)
1 1/3 1/5
18 (24)
3 1 3/5
30 (40)
5 5/3 1
48 (64)
8 8/3 8/5
72 (96)
12 4 12/5
96 (126)
16 16/3 16/5
For example, when a tape recorded in 96-hour mode is
played back in 6-hour mode, you can view the
playback picture at a speed 16 times faster than the
recorded one.

Adjusting Pictures

If streaks or noise bands appear on the playback
picture, adjust the tracking condition.
Use TRACKING –/+.
TRACKING –/+
48 (64) 72 (96) 96 (126)
1/8 1/12 1/16
3/8 1/4 3/16
5/8 5/12 5/16
1 2/3 1/2
3/2 1 3/4
2 4/3 1
31