Putting Out Of Operation; General Requirements; Care And Maintenance; Accessories - Rothenberger ROWELD P 125 Instrucciones De Uso

3.2.4

Putting out of operation

 Switch off heating element and pull power plug from the socket.
 For safty storage and transportation the machine can be kept in a crate (no. 55555).
The hotplate must be cooled off!
3.3

General requirements

Because weather and environmental influences have a decisive impact on welding, the corre-
sponding specifications in the DVS guidelines 2207 Part 1, 11 and 15 must be observed uncon-
ditionally. Outside Germany the corresponding national guidelines shall apply.
(The welding work must be monitored constantly and carefully!)
4

Care and Maintenance

Check the heating arbour and jack for signs of damage. If they are damaged they must be re-
coated. Material residue is to be removed with non-fibrous paper and methylated spirits.
The heating element may only be supplied with the voltage specified on the type plate.
If the mains cable is damaged it must be replaced with a special cable H 05 RR-F.
Do not use any cleaning products which contain solvents to clean the machine since they may
damage the plastic parts.
It is recommendable to have repairs done only by a service workshop or by the manu-
facturer!
5

Accessories

You can find suitable accessories in the main catalog or at www.rothenberger.com
6

Customer service

The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using RO SERVICE+
online: ℡ + 49 (0) 61 95/ 800 8200
www.rothenberger.com
7

Disposal

Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly dispos-
al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority.
For EU countries only:
Do not dispose electric tools with domestic waste. In accordance with the European
Directive 2012/19/EU the disposal of electrical and electronic equipment and its imple-
mentation as national law, electric tools that are no longer serviceable must be collected
separately and utilised for environmentally compatible recycling.
8 Wiring diagram (page 51)
9 Spare parts (page 52-53)
+ 49 (0) 61 95/ 800 7491  service@rothenberger.com -
ENGLISH 17