D/A Converter Mode; Adding Tracks To The End Of The Program; Clearing The Entire Program And Resuming Ordinary Playback; Changing The Input Source - Esoteric K-05Xs Manual Del Usuario

Adding tracks to the end of the program

When stopped or during playback, use the number buttons to select
the track you want to add .
Clearing the entire program and resum-
ing ordinary playback
When stopped or during playback, press the REPEAT button for at
least two seconds to end program mode .
Press the REPEAT button during program playback for at least two
seconds to resume ordinary playback from that point .
o When ordinary playback is resumed, the contents of the program
will be cleared .
In addition, when stopped or during playback, if you press the tray
OPEN/CLOSE (-) or main unit POWER button, the program contents
will also be cleared .

D/A converter mode

This unit can be used as a D/A converter when its input source is set
to an external digital input (COAX in, OPT in or USB in) .

Changing the input source

When stopped, press the MODE button repeatedly to cycle through
the following input sources .
CD/SACD
USB in
(USB input
for computer)
o When an external digital input (COAX in, OPT in, USB in) is
selected, the name and sampling frequency of the selected input
appear on the display . If there is no input signal or the unit is not
locked to the input signal, the input sampling frequency is not
shown and the input name blinks .
o If the input signal is not a digital audio signal or uses an audio sig-
nal format that is not supported by this unit (such as Dolby Digital,
DTS or AAC) "- - -" appears in place of the sampling frequency . Set
the digital output of the connected equipment to PCM audio
output .
o When an external input (COAX in, OPT in, USB in) is selected, disc
controls other than the tray open/close (-) button do not function .
COAX in
(coaxial digital input)
OPT in
(optical digital input)
21