Exchanging The Flat Pleated Filter; Cleaning The Electrodes; Troubleshooting - Kärcher NT 14/1 Eco L Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45
In the framework of maintenance and
repair work all contaminated objects
that cannot be cleaned satisfactorily
must be disposed of. Such objects must
be disposed of in impermeable bags in
accordance with the valid provisions for
the disposal of such waste.
Warning
Safety equipment for preventing hazards
must be serviced and maintained regularly.
This means that the manufacturer's staff or
persons trained by the manufacturer must
check the equipment for proper functioning
at least once a year, i.e. check for leaks, fil-
ter damage, functioning of the controlling
elements, etc.
Caution
Risk of damage! Do not use detergents
containing silicone to clean.
No outside help is required for carrying
out basic maintenance and cleaning.
The appliance surface and the inside of
the container should be cleaned regu-
larly using a damp cloth.
Warning
Risk due to dust hazardous to health. Always
use disposal clothing and P2 or higher
breath-safe masks while carrying out mainte-
nance tasks (such as changing filters).

Exchanging the flat pleated filter

 Open filter door.
 Take out the flat folded filter.
 Dispose off the used flat-folded filter in
a dust-tight bag according to the statu-
tory provisions.
 Remove the dirt that has accumulated
on the pure air side.
 Insert new flat-folded filter.
 Close the filter door, it must lock into
place.
Replace the exhaust filter
 Release and remove the suction head.
 Turn the suction basket by 180° and
keep it aside.
 Unlock the filter frame and remove it.
 Remove the exhaust filter from the filter
frame.
 Insert new exhaust filter into filter frame
as per appliance overview.
 Insert the filter frame so that the X is
pointing toward the outside.
 Let the filter frame lock in.
 Insert and lock the suction head.
Replacing the paper filter bag/fleece
Illustration
 Release and remove the suction head.
 Pull the paper filter bag/fleece filter bag
towards the rear.
 Pull the locking slide up and seal the pa-
per filter bag/fleece filter bag tightly
when removing it.
 Dispose of the used paper filter bag/
fleece filter bag according to the local
provisions.
 Insert the new paper filter bag/fleece fil-
ter bag.
 Insert and lock the suction head.

Cleaning the electrodes

 Release and remove the suction head.
 Clean the electrodes with a brush.
 Insert and lock the suction head.

Troubleshooting

Danger
First pull out the plug from the mains before
carrying out any tasks on the machine.
Note: In case of a failure (e.g. filter break-
age) the appliance must be turned off im-
mediately. The failure must be remedied
before the appliance is put into operation
again.
– 5
EN
bag
17

Publicidad

Tabla de contenido
loading

Tabla de contenido