En - Original Instructions; Installation, Operation And Maintenance Manual; Introduction And Safety - Lowara e-SV 1 Manual De Instalación, Uso Y Mantenimiento

en – Original Instructions

1 Introduction and Safety

1.1 Introduction
The purpose of this manual
This manual provides information on how to do the following in the
correct manner:
Installation
•
Operation
•
Maintenance
•
ATTENTION:
Read this manual with care before attempting to install and
use the product. Misuse of the product can cause physical
injury and damage to the material, and render the warranty
null and void.
NOTICE:
Please keep this manual for future reference and always within easy
reach near where the unit is installed.
1.1.1. Inexperienced users
WARNING:
This product must be used only by qualified users.
Qualified users are people able to recognise the risks and avoid
hazards during installation, use and maintenance of the product.
1.2 Terminology and safety symbols
About safety messages
It is extremely important that you read, understand, and follow the
safety messages and regulations carefully before handling the
product. They are published to help prevent these hazards:
Personal accidents and health problems
•
Damage to the product
•
Product malfunction
•
Danger levels
Danger levels
HAZARD
WARNING
ATTENTION
NOTICE
Categories of hazard
The categories of hazard can correspond to the levels of hazard or to
other specific symbols.
The symbol below indicates electrical hazards:
ELECTRICAL HAZARD:
These are examples of other categories that can occur. They fall
under the ordinary hazard levels and may use complementing
symbols:
Crushing hazard
•
Cutting hazard
•
Arc flash hazard
•
12
Indication
A hazardous situation which, if
not avoided, will lead to death
or serious physical injury.
A hazardous situation which, if
not avoided, can lead to death
or serious physical injury.
A hazardous situation which, if
not avoided, could lead to
minor or moderately serious
injuries.
A potentially hazardous
•
situation which, if
avoided, could result
unexpected conditions
An action that does not result
•
in physical injury
Hot surface hazard
Hot surface hazards are indicated by a specific symbol that replaces
the typical hazard level symbols:
ATTENTION:
Description of user and installer symbols
Specific information for personnel responsible for the
installation of the product within the system (hydraulic
and/or electric system), and for maintenance operations.
Specific information for the users of the product.
1.3 Disposal of packaging and product
Observe the local regulations and codes in force regarding sorted
waste disposal.
1.4 Warranty
Refer to the contractual sales documents for information on the
warranty.
1.5 Spare parts
WARNING:
Repair and/or maintenance of the pump must only be
•
carried out by Xylem or the Authorised Distributor.
Repair and/or maintenance carried out by unauthorised
•
companies could lead to malfunctioning, damage to
property and physical injury, and render the warranty
null and void.
ATTENTION:
Always cite the type and code of the product when
contacting Xylem or the Authorised Distributor to request
technical information.
1.6 Declarations
EC Declaration of Conformity (Original)
Xylem Service Italia S.r.l., with headquarters in Via Vittorio Lombardi
14 - 36075 Montecchio Maggiore VI - Italy, hereby declares that the
product
not Pump unit (see label on first page)
in
fulfils the relevant provisions of the following European Directives:
Machinery 2006/42/EC and subsequent amendments (ANNEX II -
•
natural or legal person authorised to compile the technical file:
Xylem Service Italia S.r.l.)
Eco-design 2009/125/EC and subsequent amendments, Regulation
•
(EU) no. 547/2012 (water pump) if MEI marked
and the following technical standards:
EN ISO 12100:2010,
•
1:2006+A1:2009.
Montecchio Maggiore, 07/10/2019
Amedeo Valente
(Director of Engineering
and R&D)
rev.00
EN 809:1998+A1:2009, EN 60204-