GB
ACCESSORIES AND SPARE PARTS
MALFUNCTION
Atomisation too oarse
Spray jet pulsates
The material runs down the
obje t being painted
Ex essive paint mist (overspray)
Paint in the ventilating hose
15
ACCESSORIES AND SPARE PARTS
15.1
ACCESSORIES
ORDER NO.
POS.
DESIGNATION
1
2321 879
StandardSpray spray atta hment (yellow) (with 1000 ml ontainer)
Pro esses all standard paints.
2
2321 877
FineSpray spray atta hment (brown) (with 1000 ml ontainer)
Ideal for low-vis osity paints and glazes.
3
2321 880
WallSpray spray atta hment (white) (with 1400 ml ontainer)
Designed for pro essing dispersions.
4
Container with over (1400 ml)
2324 749
Can Adapter
5
2350 692
With the Can Adapter, paint ans an be atta hed dire tly to a Cli k&Paint spray atta hment.
Suitable for: ommer ially available 750 ml paint tins (maximum dimensions Ø=102 mm, h=119 mm)
and 1000 ml paint tins (maximum dimensions Ø=112 mm, h=132 mm).
The FC 3500 annot be used with the heatable TempSpray spray atta hment.
24
CAUSE
•
Material volume too large
•
Nozzle ontaminated
•
Vis osity of oating material too high
•
Too little pressure build-up in
ontainer
•
Air filter heavily soiled
•
Amount of air too low
•
Coating material in ontainer running
out
•
Nozzle seal is missing or worn
•
Air filter heavily soiled
•
Feed tube loose
•
Feed tube / feed tube filter logged
•
Too mu h oating material applied
•
Distan e too small
•
In orre t spray atta hment
•
Distan e to the obje t too large
•
Too mu h oating material applied
•
Amount of air too high
•
Coating substan e over-diluted
•
In orre t spray atta hment
•
In orre t spraying te hnique
•
Diaphragm soiled
•
Diaphragm defe tive
FinishControl 3500
REMEDY
•
Redu e volume
•
Clean
•
Dilute further
•
Tighten ontainer
•
Change (see se tion 13.1)
•
In rease volume
•
Refill
•
Insert an inta t nozzle seal
•
Change (see se tion 13.1)
•
Insert
•
Clean or use another filter
•
Redu e volume
•
In rease distan e
•
Use another spray atta hment
•
Redu e distan e
•
Redu e volume
•
Redu e volume
•
Redu e degree of dilution
•
Use another spray atta hment
•
For information about the orre t spraying
te hnique, please see hapter 9
•
Clean the diaphragm (see se tion 13.2)
•
Repla e the diaphragm (see se tion 13.2)