Adjusting The Balance; Switching Off The Balance; Performing A Simple Weighing; Zeroing The Balance - Mettler Toledo XK-KC Manual De Usuario

XK2003KLC, XK6002KLC
1 Level the weighing platform by turning the 4 leveling screws
(1).
2 The leveling screws can be adjusted with a size 30
engineer's wrench.
3 Ensure that the leveling screws all sit flat on the floor evenly.
4 Test the stability of the weighing platform by pressing down
on or rocking the corners.
The level is correct when the air bubble lies in the center of
the level indicator (2).

4.5.4 Adjusting the balance

The balance is switched on.
1 Tap to open the system menu.
2 Tap Terminal, then
3 Tap to start the adjustment (FACT).
The adjustment screen opens.
4 Tap to start the adjustment.
The result of the adjustment for all connected weighing platforms is displayed.

4.5.5 Switching off the balance

The balance is switched on.
Unplug the power cable from the power outlet.
The balance is switched off.

4.6 Performing a simple weighing

For further information, consult the manuals provided with the terminal and the weighing platform.

4.6.1 Zeroing the balance

The balance is switched on.
1 Clear the weighing pan.
2 Press [
The balance is zeroed.
10
Metrology.
] to zero the balance.
1
2
www.mt.com/IND900
www.mt.com/PBK9
www.mt.com/PFK9
Comparator Balances